Club CSV-2300D User Manual

!Page  of 1 40USB to DVI-I Graphics Adapter CSV-2300D #USER’S MANUAL

Connection #1. Plug one end of DVI cable into the adapter's DVI connector, and the other end of DVI cable into a DVI connector of monitor. 2. Pl

Installation #Caution: DO NOT connect the USB 3.0 to DVI Adapter to a computer before installing the provided driver. #Note that the following strings

Note: If the AutoPlay does not appear automatically, locate and double-click on the Setup.exe file in the driver folder to launch the setup. Enter the

4. Be patient with the installation procedure, it may take a while. ##########5. Connect the USB 3.0 to DVI Adapter to a computer after the driver ins

For Windows® Vista users 1. Insert the supplied driver CD into a computer's CD/DVDROM. 2. Click <Run Setup.exe> to start the installation

3. Click <I Accept> for the next step. ####################4. Be patient with the installation procedure, it may take a while. ##########5. Co

6. When the operating system detects the adapter, the reminder message will appear in the Windows System Tray as below. ######Note: Click <Yes>

For Windows® XP users#1. Insert the supplied driver CD into a computer's CD/DVDROM.#2. Click <I Accept > for the next step.##############

Note: Click <Yes> to restart or <No> to manually restart later, if a prompting to restart computer message appears. ########4. Connect th

Verifying the driver To verify the driver of the adapter, follow the step below to open the Device Manager on Windows operating system. 1. Following t

Table of contents Safety instructions 3 Copyright 4 Trademarks 4 Introduction 4 Features 5 Ap

Using the adapter There are several ways to utilize the monitor attached on the adapter. The add-on monitor can be configured to use either “mirror mod

Utility settings The supplied utility allows you to configure the display mode, screen rotation, screen resolution, and physical arrangement of your m

Description of the settings #Options DescriptionDisplayLink ManagerEnable the Windows screen resolution page.Check for UpdatesCheck the latest driver

OptionsDescriptionUSB 3.0 DVI-I & HDMI Graphics AdapterFit to TVAdjust the size of Windows Desktop on the TV.#Note: This function works only when

Windows system configuration Position the mouse anywhere on your computer desktop, right-click and select <Screen Resolution> on Windows® 7/ Win

Extended mode ###########1. Refer to the Windows system configuration section to open the configuration page. 2. In the Display drop-down menu, select

4. Click <OK> to confirm and close the settings screen. 5. Once the setting is completed, simply drag and drop the application icons or the opene

Mirror mode 1. Refer to the Windows system configuration section to open the configuration page. 2. In the Display drop-down menu, select the option wi

Be the primary monitor 1. Refer to the Windows system configuration section to open the configuration page. 2. In the Display drop-down menu, select the

Advanced operations Advanced settings 1. Refer to the Windows system configuration section to open the configuration page. 2. To change the refresh rate

This manual is designed for use with the USB 3.0 to DVI Adapter. Information in this document has been carefully checked for accuracy; however, no gua

Supported resolution!Before adjusting the resolution, refer to the table below for#the supported resolution.##Note that interlaced modes and reduced b

Using multiple adapters Up to 6 adapters can be connected to one computer simultaneously. To connect multiple adapters, install the drive as describe

Note: The connected monitor(s) will still remain on the configuration page after disconnecting the DVI connector from a monitor. ###############To ret

Uninstall the adapter and driver 1. Open the Control Panel > Programs > Programs and Features on Windows® 7/ Windows® 8/ Windows® Vista, and Add

Troubleshooting The display on the add-on monitor is blank. If the monitor power is on (LED lights green in most cases), wait a moment for the monit

When playing the video in full screen mode, the motion is not smooth. Reduce the resolution of the display to 640x480 or 800x600. Use the adapter

In extended mode, the add-on monitor appears to have a black border around the desktop. This happens when the resolution used by the addon monitor i

Hardware acceleration may not available to!applications.! Check the table below for more supported information.##InterfaceWindows XPWindows Vista/ Win

Specifications Host Interface USB 3.0 Video Interface DVI Connectors Video output: DVI HDDE 30pin female connector Host upstream link: USB 3.0 Micro B

Resolutions, Refresh rate and color depth #USB Cable Separated from the body Type: USB 3.0 Type A (Male) to Micro USB 3.0 (Female) *Specifications are

Copyright This document contains proprietary information protected by copyright. All right are reserved. No part of this manual may be reproduced by a

Regulatory compliance!FCC conditions!This equipment has been tested and found to comply with#Part 15 Class B of the FCC Rules. Operation is subject to

Features Add-on monitor, LCD or projector through a single USB 3.0 port hot-plug; add or remove monitor without system reboot Small in size, works

Editing workstation Type documents on one screen while viewing reference material on the other Compare two documents simultaneously across two scr

System requirement Hardware The minimum requirements for the PC are: - With Single Core CPU at 1.2GHz or higher processor clock. Intel® Pentium®/Cel

For 3 monitors, where 1 could run DVD video while also targeting productivity and business apps. Will support only 1 video of DVD resolution at full

Parts and connection Parts #1 Micro USB connector: Connect to an available USB connector on a computer. 2 DVI connector: Connect to a desired DVI moni